Double Bond Tape Company is a manufacturer of foam double sided mounting tape for rigid surface mounting, including signs, nameplates, trim, display panels, and plastic or metal parts. The range includes acrylic foam, clear acrylic foam, PE foam, and high-density foam tapes for stable contact, gap filling, vertical load holding, and a hidden bond line without screws or liquid adhesive overflow.
Showing all 3 results
Double sided foam mounting tape is selected when a rigid component must stay in position with a neat appearance and consistent contact. Instead of drilling holes or applying liquid adhesive, the tape sits behind the part and distributes the load across the bonded area. The foam core bridges small surface gaps, while the adhesive develops better wet-out after pressure and dwell time.
For production use, selection should go beyond first-touch tack. A metal nameplate, acrylic display panel, or plastic trim may feel secure during a short peel check but still move after vertical installation. Sample evaluation should include static shear observation, edge-lift review, 24-72 hour bond build-up, and testing on the actual painted metal, glass, ABS, PC, acrylic, aluminum, or stainless steel surface.
Acrylic foam mounting tape is used for stronger holding power, long-term bonding, and parts exposed to vibration, movement, or temperature change. Clear acrylic foam tape suits glass, acrylic display parts, and transparent panels where the bond edge should remain less visible.
PE foam mounting tape is selected for light to medium sign and nameplate work where conformability and cost control matter. High-density foam mounting tape gives firmer support for decorative panels, display frames, and trim strips that need better compression resistance. Black foam hides the bond line behind dark moulding or frames, while white foam suits general signs and nameplates.
Start with the surface, not only the tape thickness. Painted metal, glass, aluminum, ABS, PC, and acrylic do not always bond in the same way, especially when coatings, texture, release agents, or molded plastic additives are present. Smooth surfaces allow better wet-out, while powder-coated parts, curved trim, or textured plastics may need higher tack, wider bonding, or surface preparation.
Then review the load direction. A foam tape used on a vertical sign should be tested for sliding and edge lift, not only peel adhesion. Increasing bonded area often gives a more reliable result than choosing a thicker foam. Excessive thickness may improve gap contact, but can allow movement when the part is heavy or under curve stress.
Start with the surface and load direction, not only the tape thickness. Before comparing 0.8 mm, 1.0 mm, 1.5 mm, or thicker constructions, use the foam tape thickness technical data to distinguish nominal thickness, compressed thickness, and total tape caliper. Then confirm bonded area, part weight, foam density, application pressure, and dwell on the actual assembly.
Vertical load holding is not decided by adhesive strength alone. For signs, nameplates, trim strips, and display panels, the tape must resist slow movement under continuous weight. Static shear, foam density, wet-out, part weight, and contact area should be reviewed together. A wider or longer tape layout often performs better because the load is spread across more bonded surface.
Item | Typical Range / Customizable Value |
Product Category | Double sided foam mounting tape for rigid surface bonding |
Foam Core | Acrylic foam, PE foam, high-density foam, clear acrylic foam |
Foam Color | Black, white, clear, or grey by application requirement |
Adhesive Type | Acrylic pressure sensitive adhesive, high tack grade, high shear grade |
Thickness Range | 0.25-3.0 mm reference range, custom thickness by project |
Width Range | 6-1200 mm slit width, custom roll width available |
Supply Format | Log roll, slit roll, sheet, strip, pad, die-cut part, kiss-cut part |
Application Surfaces | Painted metal, glass, ABS, PC, acrylic, aluminum, stainless steel |
Sample Check | Surface cleaning, pressure, dwell time, load direction, bonded area |
Bulk Confirmation | Substrate sample, part weight, drawing, tolerance, liner release, roll or die-cut format |
Double Bond Tape Company can adjust the tape around the actual mounting task instead of only offering standard roll sizes. Thickness can be selected for low-profile bonding or controlled gap compensation. Foam color can match visible edges, and the adhesive grade can be reviewed for initial tack, holding power, painted metal contact, plastic bonding, and semi-outdoor exposure.
For converted supply, production teams usually provide substrate samples, drawings, panel weight, bonding area, liner preference, and assembly method. Slit rolls work well for manual or dispenser-based application. Sheets, strips, kiss-cut pads, and die-cut parts suit repeated nameplate, emblem, and panel assembly because adhesive placement stays consistent. Release liner choice also affects assembly speed and die-cut handling.
The right foam double sided mounting tape should match both the surface material and assembly condition. Painted metal and glass usually need strong surface contact and clean preparation, while ABS, PC, and acrylic panels may require a grade that wets out well on medium-surface-energy plastics. A conformable foam core can help with small gaps, but too much thickness may allow movement under load. Foam color should also be reviewed when the bond line may be visible from the edge.
Acrylic foam is selected for higher holding power, aging resistance, and long-term trim mounting. PE foam is used for light to medium signs, nameplates, and plastic parts where conformability and cost control are important.
Yes, when the tape is matched to the part weight, bonded area, surface condition, foam density, application pressure, and dwell time. For vertical signs, static shear and 24-72 hour observation are more useful than peel adhesion alone.
Black foam works well behind dark trim, automotive moulding, and black frames. White foam is common for general signs and nameplates. Clear acrylic foam is preferred for glass, acrylic, or transparent display panels.
Yes. It can be supplied as slit rolls, sheets, strips, kiss-cut pads, or die-cut parts. For repeat production, drawings, liner style, tolerance, and application method should be confirmed before bulk manufacturing.