Double Faced Flooring Tape

Double faced flooring tape is used when floor covering needs firm placement but full-spread liquid adhesive is unnecessary or not preferred. It can hold carpet backing during layout, keep exhibition carpet flat, secure rug edges, reinforce carpet seams, or join synthetic turf panels. Compared with general mounting tape, it focuses on floor compatibility, edge lift, clean removal, backing transfer, and adhesive behavior.

Cloth and fabric carriers are useful on smooth and slightly irregular floors because they follow minor texture better than thin film tape. For removable or semi-permanent use, press a sample strip on the actual floor for 24 hours, then check residue, coating marks, adhesive transfer, and edge lift after repeated walking.

Product Range / Covered Products

The range covers cloth flooring tape, self adhesive carpet seaming tape, hot melt carpet seam tape, carpet edge seam tape, and synthetic turf seaming tape. These products share a flooring installation direction, but each focuses on a different job: surface holding, seam support, edge control, or long-line turf joining.

Selection Guide

Selection should begin with installation conditions, not only tape thickness or tack. Temporary exhibition carpet needs fast tack, stable holding, and controlled removal. Carpet tile fixing needs shear stability and consistent liner release. Seam work should confirm self-adhesive placement, hot melt activation, scrim reinforcement, removable floor contact, or wider support. For seams, 75mm, 100mm, or 150mm tape supports trimmed edges, while glass fiber scrim improves tensile strength. For event flooring, 48mm or 50mm rolls are easier to place and remove. For rug edges, 25mm or 38mm tape can reduce waste.

Common errors include using permanent rubber adhesive on sensitive finished floors, choosing narrow tape for wide joints, applying hot melt seam tape without enough backing transfer, or using a weak carrier on long turf seams that are pulled during positioning. A small sample test usually prevents these problems. PVC, laminate, tile, wood, and other floor finishes should be checked on the actual surface before bulk use.When the contact surface is vinyl, LVT, or LVP, adhesion should be checked together with dwell time and removal behavior; see our vinyl flooring tape selection and testing guide for a practical approval method. Record edge lift, adhesive transfer, and surface appearance after the planned dwell before approving the grade.

Product Series

Material / Glue Choice

Material and adhesive choice should follow floor type and service time. Cloth carrier with rubber adhesive gives fast tack but may leave residue. Removable fabric grades suit events, while glass fiber scrim with hot melt adhesive adds seam support and tear resistance. Non-woven pressure-sensitive turf tape supports fast long-seam positioning.

Benefits

• Compares flooring tape by carrier, adhesive system, width, and installation duration.
• Cloth and fabric carriers conform to smooth and slightly irregular surfaces.
• Hot melt adhesive supports carpet seams where backing transfer is critical.
• Glass fiber scrim improves tensile support, tear resistance, and seam stability.
• Custom width selection helps reduce edge lift on rug borders, carpet seams, and turf joints.
• Sample testing reduces residue, coating marks, weak seam bonding, and wrong adhesive selection.

Where does double faced flooring tape fit in commercial floor installation?

This tape fits commercial floor installation when teams need controlled bonding without spreading wet adhesive across the whole floor. It can be used for carpet backing fixation, rug edge holding, carpet tile positioning, temporary floor covering, exhibition carpet layout, and synthetic turf joining. On finished floors, the main concerns are initial tack, residue, surface marking, and bond loss after removal.

TDS / Technical Range

Applications

• Exhibition carpet and temporary event flooring requiring fast installation and controlled removal.
• Carpet and pad installation in hotels, venues, showrooms, offices, and rental spaces.
• Carpet tile fixing where full-spread adhesive is not required.
• Rug edge holding where borders, corners, or transition edges may lift.
• Carpet seam support for trimmed edges, backing joints, and transition lines.
• Synthetic turf joining for landscaping, playgrounds, display turf, and light sports areas.

Customization Options

Customization should be confirmed around the actual installation condition. For general floor fixing, 48mm or 50mm rolls are common. For carpet seam support, 75mm, 100mm, or 150mm rolls provide wider backing contact. For rug edges, 25mm or 38mm tape may reduce waste. Adjustable items include carrier type, adhesive tack, bonding level, roll width, roll length, thickness, liner release, color, roll label, and carton quantity. Sensitive finished floors should be approved by removal samples before large production.

How should flooring teams select tape for carpet seams, rug edges, and turf joints?

For temporary floor covering and event carpet, cloth carrier tape with rubber adhesive provides fast tack and easy handling. For carpet seams, self adhesive carpet seaming tape or hot melt seam tape should transfer adhesive into the carpet backing and keep trimmed edges aligned. For rug borders, choose enough width to reduce corner lift. For artificial grass, test moisture exposure, seam pressure, and tear resistance along long joint lines.

FAQ

Can it be used on PVC, wood, tile, and concrete floors?

Yes, but each surface should be tested first. Finished wood, soft PVC, coated tile, sealed concrete, laminate, and rubber floor may react differently, so a 24-hour check is recommended.

Which option is better for carpet seam work?

Cloth carrier tape may suit simple edge holding. For stronger seams, hot melt carpet seam tape or reinforced self adhesive carpet seaming tape gives better backing support and trimmed edge stability.

How can edge lift be reduced after foot traffic?

Use enough width, clean dust from the floor, apply even pressure, and test real traffic conditions. Edge lift often comes from narrow tape, weak carrier strength, low contact pressure, or incompatible floor coating.

Is self-adhesive turf seaming tape suitable for heavy-use areas?

It suits many light and medium-duty turf joints. For long seams or heavy sports traffic, wider reinforced seam tape with turf adhesive is usually safer.