Clear Acrylic Foam Tape

Double Bond Tape Company is a Clear Acrylic Foam Tape manufacturer for invisible bonding on glass partitions, clear plastics, acrylic sheets, PC panels, safety glass, and display/signage panels. This transparent acrylic foam tape is made with a clear acrylic foam core, forming a low-haze bond line without screws, rivets, or visible fixing marks. In visible panel work, optical appearance, bubble control, edge lifting, pressure dwell, and long-term holding should be checked together before production use.

Product Video

Product Photos

Product Overview

Clear Acrylic Foam Tape is used where the adhesive line may remain visible through glass, acrylic, PC, or other clear display materials. It is not an opaque PE foam tape or a black/grey automotive foam tape. The main value is a cleaner transparent bond area, better edge appearance, and lower haze after proper pressure bonding.

The clear acrylic foam core helps spread stress between hard surfaces. This matters when rigid panels expand slightly, carry small surface gaps, or need to stay visually clean after assembly. For flat transparent parts, 0.25 mm or 0.5 mm grades are often used to keep a low profile. For glass partitioning, acrylic signs, safety glass edge bonding, or slightly uneven surfaces, 1.0 mm and 1.5 mm grades can improve contact and gap compensation. Typical reference thickness tolerance can be controlled around +/-0.05 mm to +/-0.10 mm, depending on thickness and converting method.

In reference appearance checks, bonded samples should show no obvious cloudy edge, dark shadow, trapped air path, or uneven liner transfer after 24 hours of dwell under normal room conditions.

 Benefits

• Leaves a clean, low-haze bonding area on visible glass, acrylic, PC, and display panel assemblies.
• Transparent acrylic foam core helps reduce point stress when rigid panels expand, shift, or carry small gaps.
• Acrylic adhesive gives better wet-out on high surface energy materials after firm pressure and enough dwell time.
• Helps reduce cloudy edges, dark shadows, bubble paths, edge lifting, and visible fastening marks.
• Supplied from the factory as slit rolls, narrow strips, kiss-cut parts, or die-cut transparent mounting pads.
• Typical reference 180 degree peel adhesion can reach 18-30 N/25 mm after 72 hours on clean glass or stainless steel, depending on thickness, pressure, and surface condition.
• Static shear holding can reach >=24 h at 23 C under a 1 kg / 25 mm x 25 mm reference load.
• UV and weather-resistant acrylic construction helps keep a cleaner appearance in indoor and selected outdoor-facing applications, but actual exposure testing is recommended before mass production.

Where does a low-haze transparent bond line make the biggest difference?

A low-haze transparent bond line matters most when the tape is placed inside the visible area of glass partitions, acrylic sheets, PC panels, safety glass, display windows, or illuminated signage. In these assemblies, the adhesive should hold the panel without leaving a cloudy edge, dark shadow, bubble mark, or obvious fixing line. For appearance checking, a sample can be pressed for 24 hours and reviewed under natural light and backlight. A clean result should show no obvious edge lifting, trapped air path, liner residue, or uneven contact line after bonding.

TDS

Product Packaging

Product Production

Applications

• Frameless glass partition bonding where a transparent bond line is preferred.
• Acrylic sheet and PC panel bonding for display fixtures, protective covers, and clear plastic assemblies.
• Safety glass edge bonding and transparent panel assembly where edge lifting must be checked after dwell.
• Display windows, clear signs, backlit signage, and visual communication panels requiring low-haze appearance.
• Glass-to-metal, acrylic-to-metal, and PC-to-painted panel bonding after compatibility testing.
• Die-cut clear mounting pads for nameplates, decorative trims, and transparent fixtures.
• Indoor architectural glazing support where drilling marks or visible fasteners are not desired.
• Narrow-width strips for clear panel edge bonding, with reference slitting tolerance around +/-0.5 mm for common widths.

How should clear acrylic foam tape be tested before bonding glass, acrylic, or PC panels?

Before production bonding, Clear Acrylic Foam Tape should be tested on the actual glass, acrylic, or PC panel. Coating type, surface energy, cleaning method, panel weight, edge design, and exposure conditions can all affect the final result. The bonding surface should be clean, dry, and free from dust, oil, release agent, and moisture. For transparent parts, testing should include 180 degree peel strength, shear holding, haze appearance, bubble marks, edge lifting, liner removal, and contact line uniformity. Bond strength normally improves as the pressure-sensitive adhesive wets out, so 24-hour and 72-hour dwell checks are useful before confirming factory production.

Loading Container

FAQ

1. Is Clear Acrylic Foam Tape suitable for transparent panels?

Yes. It is designed for glass partitions, acrylic sheets, PC panels, safety glass, and display panels where a clean transparent bond line is required.

2. Which thickness should be selected?

Thin grades are better for low-profile bonding. Thicker grades help with small gap filling, stress distribution, and rigid panel assembly.

3. Can it be made into custom die-cut shapes?

Yes. It can be supplied as custom slit rolls, narrow strips, kiss-cut parts, or die-cut pads for transparent mounting applications.

4. Does the surface need cleaning before bonding?

Yes. The surface should be dry, clean, and free from oil, dust, moisture, or release agents before firm pressure is applied.