No products were found matching your selection.
Other Related Products
-
- Types of Foam Gasket Materials: Silicone foam, Polyurethane foam, Polyethylene foam, Urethane foam, Neoprene foam.
- Adhesive: High-performance acrylic or a high temperature silicone adhesive.
- Available Width: 15 mm, 19 mm, 25 mm and so on.
- Standard Length: 10 m, 15 meter one roll.
- Tape Thickness: 6 mm.
-
- Foam backing: Closed-cell EVA rubber foam, soft and flexible
- Common thickness: 1 mm, 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Colors: Black, white, grey, or made-to-order color
- Adhesive: Single-sided or double-sided acrylic / hot melt adhesive
- Liner: Release paper, glassine liner, or PET release film
- Formats:Slit rolls, jumbo rolls, strips, pads, and die-cut parts
-
- Adhesive Type: Strong acrylic adhesive with high tack for secure bonding.
- Material: Soft, flexible foam made from blended cellular EPDM.
- Feature: Available in various variants – single and double sided.
- Available Thickness: Form 1 mm to 15 mm.
- Available Width: From 6 mm to 125 mm or customize.
- Standard Length: 10 m.
-
- Common thickness:5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Color:Deep black for clean visible edges
- Carrier:Closed-cell black PE foam
- Adhesive:Double sided acrylic or rubber adhesive option
- Liner:Paper or film liner for slitting and die-cutting
- Uses:Signs, badges, trim parts, display frames
-
- Material: Itis made of Neoprene closed cell foam.
- Adhesive: Aggressive rubber adhesive on one side or two side.
- Product Size: 1/2 inch Wide x 3 /8 inch Thick.
- Standard Length: 10 ft, 33 ft.
-
- Size: 1030 mm x 100 m,1030 mm x 200 m,1030 mm x 300 m.
- Specifications: 0.5 mm,1 mm,1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm.
- Liner Color: Yellow paper/White Paper/Blue/Red/Green film.
- Backing : White/Black Polyethylene Foam.
- Adhesive: Acrylic Solvent /Hot Melt.
-
- Backing: Crafted from gray acrylic foam.
- Adhesive: High strength double-sided acrylic adhesive.
- Tape Width: 6 mm, 9 mm, 12 mm, 19 mm.
- Standard Roll: 10 m.
- Tape Thickness: 0.8 mm, 1.1 mm, 2.3 mm or customize.
-
- Common thickness: 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm
- Common width: 10 mm, 12 mm, 15 mm, 20 mm, 25 mm, 50 mm
- Color options: Clear, white, black
- Carrier: High-density foam or acrylic foam
- Adhesive: Pressure-sensitive acrylic adhesive
- Main use: No-drill indoor mounting on smooth rigid surfaces
-
- Common sizes: 5 mm-980 mm slit rolls, die-cut pads available
- Color: Black, white, or gray foam options
- Material: PU foam carrier with acrylic adhesive
- Structure: Double-sided adhesive with release liner
- Thickness options: 0.5 mm-3.0 mm typical range
- Applications: Panel bonding, nameplates, light signage, appliance trim
