No products were found matching your selection.

Other Related Products

  • EPDM Sponge Specific Gravity and Density Data

    EPDM sponge specific gravity should be read with apparent density, cell structure, compression behavior, and specimen condition, not as one universal number. This reference applies to cellular EPDM used as sheet, gasket, cushioning substrate, or adhesive-tape backing. Published ranges support comparison only; confirm the tested grade under the intended surface, load, temperature, and process conditions.

    Read moreDone

  • Thermal Break Foam Tape

    • Common size: 25 mm-100 mm width, custom slit rolls available
    • Color: Black, grey, or white closed cell foam
    • Material: PE/XPE closed cell foam with pressure-sensitive adhesive
    • Thickness: 3 mm-12 mm, selected by joint gap and fastener pressure
    • Use position: Between roof panels, wall cladding, frames, purlins, and girts
    • Main function: Thermal bridge reduction and condensation control
    Read moreDone

  • Heat Bond Carpet Seaming Tape

    • Common Width: 90mm, 100mm, 150mm
    • Roll Length: 20m, 25m, 50m
    • Color: White, brown, gold paper
    • Adhesive: Heat bond hot melt adhesive
    • Reinforcement: Glass fiber scrim
    • Use: Carpet seams, rug edge joining
    Read moreDone

  • Double Sided Body Tape For Clothes

    • Widths: 1–5 cm; Lengths: 10–50 cm
    • Clear, near-invisible for discreet support
    • Material: acrylic-based adhesive on polyethylene film
    • Thickness: 0.12 mm +/- 0.02 mm
    • Holds well under light sweat conditions
    • Recommended patch test for sensitive skin
    Read moreDone

  • Heavy Duty Wall Mounting Tape

    • Common thickness: 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm
    • Common width: 10 mm, 12 mm, 15 mm, 20 mm, 25 mm, 50 mm
    • Color options: Clear, white, black
    • Carrier: High-density foam or acrylic foam
    • Adhesive: Pressure-sensitive acrylic adhesive
    • Main use: No-drill indoor mounting on smooth rigid surfaces
    Read moreDone

  • Adhesive Backed Neoprene Strips

    • Common size: 0.5 mm-10 mm thickness, custom slit widths
    • Color: Black solid neoprene rubber, other colors by review
    • Material: Neoprene rubber, Shore A 50-70 typical
    • Adhesive backing: Acrylic, rubber-based, or LSE PSA
    • Release liner: Paper, PET film, split liner, or finger-lift liner
    • Processing:Slitting, kiss-cut, cut length, and die-cut strips
    Read moreDone

  • PET Double Sided Tape

    • Common thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
    • Color options: Clear tape, red film liner, yellow paper liner, clear film liner
    • Carrier material: Stable PET film carrier
    • Adhesive structure: Double coated acrylic pressure-sensitive adhesive
    • Supply form: Jumbo roll, slit roll, long roll, sheet, die-cut part
    • Applications: Electronics, panels, nameplates, displays, automotive trim
    Read moreDone

  • Polyurethane Foam Mounting Tape

    • Common sizes: 5 mm-980 mm slit rolls, die-cut pads available
    • Color: Black, white, or gray foam options
    • Material: PU foam carrier with acrylic adhesive
    • Structure: Double-sided adhesive with release liner
    • Thickness options: 0.5 mm-3.0 mm typical range
    • Applications: Panel bonding, nameplates, light signage, appliance trim
    Read moreDone

  • Black Polyethylene Foam Tape

    • Common thickness:5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
    • Color:Deep black for clean visible edges
    • Carrier:Closed-cell black PE foam
    • Adhesive:Double sided acrylic or rubber adhesive option
    • Liner:Paper or film liner for slitting and die-cutting
    • Uses:Signs, badges, trim parts, display frames
    Read moreDone