No products were found matching your selection.

Other Related Products

  • Black Polyethylene Foam Tape

    • Common thickness:5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
    • Color:Deep black for clean visible edges
    • Carrier:Closed-cell black PE foam
    • Adhesive:Double sided acrylic or rubber adhesive option
    • Liner:Paper or film liner for slitting and die-cutting
    • Uses:Signs, badges, trim parts, display frames
    Read moreDone

  • Neoprene Adhesive Strip

    • Material: Itis made of Neoprene closed cell foam.
    • Adhesive: Aggressive rubber adhesive on one side or two side.
    • Product Size: 1/2 inch Wide x 3 /8 inch Thick.
    • Standard Length: 10 ft, 33 ft.
    Read moreDone

  • Foam Tape Jumbo Roll For Automotive Use

    • Size: 1030 mm x 100 m,1030 mm x 200 m,1030 mm x 300 m.
    • Specifications: 0.5 mm,1 mm,1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm.
    • Liner Color: Yellow paper/White Paper/Blue/Red/Green film.
    • Backing : White/Black Polyethylene Foam.
    • Adhesive: Acrylic Solvent /Hot Melt.
    Read moreDone

  • EVA Rubber Foam Insulation Tape

    • Foam backing: Closed-cell EVA rubber foam, soft and flexible
    • Common thickness: 1 mm, 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
    • Colors: Black, white, grey, or made-to-order color
    • Adhesive: Single-sided or double-sided acrylic / hot melt adhesive
    • Liner: Release paper, glassine liner, or PET release film
    • Formats:Slit rolls, jumbo rolls, strips, pads, and die-cut parts
    Read moreDone

  • PET Double Sided Tape

    • Common thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
    • Color options: Clear tape, red film liner, yellow paper liner, clear film liner
    • Carrier material: Stable PET film carrier
    • Adhesive structure: Double coated acrylic pressure-sensitive adhesive
    • Supply form: Jumbo roll, slit roll, long roll, sheet, die-cut part
    • Applications: Electronics, panels, nameplates, displays, automotive trim
    Read moreDone

  • Polyurethane Foam Mounting Tape

    • Common sizes: 5 mm-980 mm slit rolls, die-cut pads available
    • Color: Black, white, or gray foam options
    • Material: PU foam carrier with acrylic adhesive
    • Structure: Double-sided adhesive with release liner
    • Thickness options: 0.5 mm-3.0 mm typical range
    • Applications: Panel bonding, nameplates, light signage, appliance trim
    Read moreDone

  • Double Coated Cloth Carpet Tape

    • Common width: 12 mm, 24 mm, 48 mm, 50 mm, 100 mm, or made-to-width rolls
    • Common length: 10 m, 25 m, 50 m, 100 m, or jumbo roll converting
    • Color: White, off-white, natural cloth, or liner-dependent appearance
    • Carrier: Cloth/fabric carrier with good tensile support
    • Adhesive: Rubber-based pressure-sensitive adhesive on both sides
    • Liner: Glassine paper, siliconized paper, or PE film release liner
    Read moreDone

  • NBR Rubber Foam Insulation Tape

    • Material: Closed-cell NBR rubber foam
    • Color: Black
    • Adhesive: Pressure-sensitive adhesive backing
    • Liner: Silicone paper or film release liner
    • Thickness: 3mm, 6mm, 9mm, 12mm, or custom
    • Width: 25mm, 38mm, 50mm, 75mm, 100mm, or slit width
    Read moreDone

  • Two Sided Paper Tape

    • Adhesive Types: Solvent acrylic, water-based acrylic, hot-melt rubber, solvent rubber.

    • Carrier Options: Tissue, PET film, non-woven fabric.

    • Liner Choices: Glassine paper, PE kraft, PET film, custom logo liner.

    • Multiple sizes: Width is 6 mm, 9 mm, 12 mm, 15 mm, 18 mm.

    • Thickness: 0.08 mm – 0.14 mm.

    • Tape Length: 10 meters, 30 meters for each roll.

    Read moreDone