No products were found matching your selection.

Other Related Products

  • PET Double Sided Tape

    • Common thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
    • Color options: Clear tape, red film liner, yellow paper liner, clear film liner
    • Carrier material: Stable PET film carrier
    • Adhesive structure: Double coated acrylic pressure-sensitive adhesive
    • Supply form: Jumbo roll, slit roll, long roll, sheet, die-cut part
    • Applications: Electronics, panels, nameplates, displays, automotive trim
    Read moreDone

  • EPDM Sponge Specific Gravity and Density Data

    EPDM sponge specific gravity should be read with apparent density, cell structure, compression behavior, and specimen condition, not as one universal number. This reference applies to cellular EPDM used as sheet, gasket, cushioning substrate, or adhesive-tape backing. Published ranges support comparison only; confirm the tested grade under the intended surface, load, temperature, and process conditions.

    Read moreDone

  • Adhesive Backed Neoprene Strips

    • Common size: 0.5 mm-10 mm thickness, custom slit widths
    • Color: Black solid neoprene rubber, other colors by review
    • Material: Neoprene rubber, Shore A 50-70 typical
    • Adhesive backing: Acrylic, rubber-based, or LSE PSA
    • Release liner: Paper, PET film, split liner, or finger-lift liner
    • Processing:Slitting, kiss-cut, cut length, and die-cut strips
    Read moreDone

  • Clear Acrylic Foam Tape

    • Color: Clear transparent appearance
    • Core: Clear acrylic foam core
    • Adhesive: Acrylic pressure-sensitive adhesive
    • Thickness: 0.25 mm to 2.0 mm typical range
    • Liner: PE or PET release film
    • Format: Rolls, slit rolls, strips, kiss-cut parts, die-cut pads
    Read moreDone

  • Black Polyethylene Foam Tape

    • Common thickness:5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
    • Color:Deep black for clean visible edges
    • Carrier:Closed-cell black PE foam
    • Adhesive:Double sided acrylic or rubber adhesive option
    • Liner:Paper or film liner for slitting and die-cutting
    • Uses:Signs, badges, trim parts, display frames
    Read moreDone

  • EPDM Rubber Adhesive Tape

    • Common thickness: 1 mm to 12 mm
    • Color: black EPDM rubber or cellular rubber
    • Carrier: closed-cell EPDM foam or cellular rubber
    • Adhesive: high-tack acrylic or rubber-based coating
    • Liner: release paper or film liner options
    • Format: slit rolls, gasket strips, die-cut pads
    Read moreDone

  • Double Sided Body Tape For Clothes

    • Widths: 1–5 cm; Lengths: 10–50 cm
    • Clear, near-invisible for discreet support
    • Material: acrylic-based adhesive on polyethylene film
    • Thickness: 0.12 mm +/- 0.02 mm
    • Holds well under light sweat conditions
    • Recommended patch test for sensitive skin
    Read moreDone

  • Heat Bond Carpet Seaming Tape

    • Common Width: 90mm, 100mm, 150mm
    • Roll Length: 20m, 25m, 50m
    • Color: White, brown, gold paper
    • Adhesive: Heat bond hot melt adhesive
    • Reinforcement: Glass fiber scrim
    • Use: Carpet seams, rug edge joining
    Read moreDone

  • Adhesive Tape Solutions for Foam Converting, Lamination and Die Cutting

    Adhesive tapes for foam converting must do more than create an initial bond. They must laminate cleanly to the foam, stay dimensionally stable through slitting or die cutting, release from the liner at the right moment, and continue performing after the converted part is assembled. This solution is intended for foam gaskets, sealing strips, pads, spacers, vibration-control parts and similar components made from PE, EVA, PU, EPDM, neoprene and other foam substrates. The main risks are poor wet-out, edge lifting, adhesive transfer, foam compression, liner instability and cutting distortion. Selection should therefore balance the foam surface, adhesive construction, carrier, liner, converting method, load and service environment.

    Read moreDone