No products were found matching your selection.

Other Related Products

  • Neoprene Adhesive Strip

    • Material: Itis made of Neoprene closed cell foam.
    • Adhesive: Aggressive rubber adhesive on one side or two side.
    • Product Size: 1/2 inch Wide x 3 /8 inch Thick.
    • Standard Length: 10 ft, 33 ft.
    Read moreDone

  • NBR Rubber Foam Insulation Tape

    • Material: Closed-cell NBR rubber foam
    • Color: Black
    • Adhesive: Pressure-sensitive adhesive backing
    • Liner: Silicone paper or film release liner
    • Thickness: 3mm, 6mm, 9mm, 12mm, or custom
    • Width: 25mm, 38mm, 50mm, 75mm, 100mm, or slit width
    Read moreDone

  • Polyurethane Foam Mounting Tape

    • Common sizes: 5 mm-980 mm slit rolls, die-cut pads available
    • Color: Black, white, or gray foam options
    • Material: PU foam carrier with acrylic adhesive
    • Structure: Double-sided adhesive with release liner
    • Thickness options: 0.5 mm-3.0 mm typical range
    • Applications: Panel bonding, nameplates, light signage, appliance trim
    Read moreDone

  • Thermal Break Foam Tape

    • Common size: 25 mm-100 mm width, custom slit rolls available
    • Color: Black, grey, or white closed cell foam
    • Material: PE/XPE closed cell foam with pressure-sensitive adhesive
    • Thickness: 3 mm-12 mm, selected by joint gap and fastener pressure
    • Use position: Between roof panels, wall cladding, frames, purlins, and girts
    • Main function: Thermal bridge reduction and condensation control
    Read moreDone

  • EVA Rubber Foam Insulation Tape

    • Foam backing: Closed-cell EVA rubber foam, soft and flexible
    • Common thickness: 1 mm, 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
    • Colors: Black, white, grey, or made-to-order color
    • Adhesive: Single-sided or double-sided acrylic / hot melt adhesive
    • Liner: Release paper, glassine liner, or PET release film
    • Formats:Slit rolls, jumbo rolls, strips, pads, and die-cut parts
    Read moreDone

  • Heavy Duty Wall Mounting Tape

    • Common thickness: 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm
    • Common width: 10 mm, 12 mm, 15 mm, 20 mm, 25 mm, 50 mm
    • Color options: Clear, white, black
    • Carrier: High-density foam or acrylic foam
    • Adhesive: Pressure-sensitive acrylic adhesive
    • Main use: No-drill indoor mounting on smooth rigid surfaces
    Read moreDone

  • Double Coated Cloth Carpet Tape

    • Common width: 12 mm, 24 mm, 48 mm, 50 mm, 100 mm, or made-to-width rolls
    • Common length: 10 m, 25 m, 50 m, 100 m, or jumbo roll converting
    • Color: White, off-white, natural cloth, or liner-dependent appearance
    • Carrier: Cloth/fabric carrier with good tensile support
    • Adhesive: Rubber-based pressure-sensitive adhesive on both sides
    • Liner: Glassine paper, siliconized paper, or PE film release liner
    Read moreDone

  • EPDM Adhesive Tape

    • Adhesive Type: Strong acrylic adhesive with high tack for secure bonding.
    • Material: Soft, flexible foam made from blended cellular EPDM.
    • Feature: Available in various variants – single and double sided.
    • Available Thickness: Form 1 mm to 15 mm.
    • Available Width: From 6 mm to 125 mm or customize.
    • Standard Length: 10 m.
    Read moreDone

  • Foam Tape Jumbo Roll For Automotive Use

    • Size: 1030 mm x 100 m,1030 mm x 200 m,1030 mm x 300 m.
    • Specifications: 0.5 mm,1 mm,1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm.
    • Liner Color: Yellow paper/White Paper/Blue/Red/Green film.
    • Backing : White/Black Polyethylene Foam.
    • Adhesive: Acrylic Solvent /Hot Melt.
    Read moreDone