No products were found matching your selection.

Other Related Products

  • Adhesive Tape Solutions for Foam Converting, Lamination and Die Cutting

    Adhesive tapes for foam converting must do more than create an initial bond. They must laminate cleanly to the foam, stay dimensionally stable through slitting or die cutting, release from the liner at the right moment, and continue performing after the converted part is assembled. This solution is intended for foam gaskets, sealing strips, pads, spacers, vibration-control parts and similar components made from PE, EVA, PU, EPDM, neoprene and other foam substrates. The main risks are poor wet-out, edge lifting, adhesive transfer, foam compression, liner instability and cutting distortion. Selection should therefore balance the foam surface, adhesive construction, carrier, liner, converting method, load and service environment.

    Read moreDone

  • EVA Rubber Foam Insulation Tape

    • Foam backing: Closed-cell EVA rubber foam, soft and flexible
    • Common thickness: 1 mm, 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
    • Colors: Black, white, grey, or made-to-order color
    • Adhesive: Single-sided or double-sided acrylic / hot melt adhesive
    • Liner: Release paper, glassine liner, or PET release film
    • Formats:Slit rolls, jumbo rolls, strips, pads, and die-cut parts
    Read moreDone

  • High Temperature Tape For Smoker

    • Width: 12 mm, 15 mm, 20 mm, 25 mm
    • Thickness: 2 mm, 3 mm, 4 mm
    • Length: 5 m, 10 m, 15 ft, custom
    • Color: Black or dark gray
    • Material: High-temperature fiber/felt
    • Backing: Self-adhesive with release liner
    Read moreDone

  • Closed Cell Foam Glazing Tape

    • Common thickness: 1 mm, 1.5 mm, 2 mm, 3 mm, 4 mm, 6 mm
    • Common width: 6 mm-25 mm, slit rolls available
    • Foam color: Black or white closed-cell foam
    • Material: Closed-cell PE/PVC foam
    • Adhesive: Pressure-sensitive acrylic adhesive
    • Liner: Blue, white, or clear release film
    Read moreDone

  • Polyurethane Foam Mounting Tape

    • Common sizes: 5 mm-980 mm slit rolls, die-cut pads available
    • Color: Black, white, or gray foam options
    • Material: PU foam carrier with acrylic adhesive
    • Structure: Double-sided adhesive with release liner
    • Thickness options: 0.5 mm-3.0 mm typical range
    • Applications: Panel bonding, nameplates, light signage, appliance trim
    Read moreDone

  • Double Coated Cloth Carpet Tape

    • Common width: 12 mm, 24 mm, 48 mm, 50 mm, 100 mm, or made-to-width rolls
    • Common length: 10 m, 25 m, 50 m, 100 m, or jumbo roll converting
    • Color: White, off-white, natural cloth, or liner-dependent appearance
    • Carrier: Cloth/fabric carrier with good tensile support
    • Adhesive: Rubber-based pressure-sensitive adhesive on both sides
    • Liner: Glassine paper, siliconized paper, or PE film release liner
    Read moreDone

  • Black Polyethylene Foam Tape

    • Common thickness:5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
    • Color:Deep black for clean visible edges
    • Carrier:Closed-cell black PE foam
    • Adhesive:Double sided acrylic or rubber adhesive option
    • Liner:Paper or film liner for slitting and die-cutting
    • Uses:Signs, badges, trim parts, display frames
    Read moreDone

  • Heavy Duty Wall Mounting Tape

    • Common thickness: 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm
    • Common width: 10 mm, 12 mm, 15 mm, 20 mm, 25 mm, 50 mm
    • Color options: Clear, white, black
    • Carrier: High-density foam or acrylic foam
    • Adhesive: Pressure-sensitive acrylic adhesive
    • Main use: No-drill indoor mounting on smooth rigid surfaces
    Read moreDone

  • NBR Rubber Foam Insulation Tape

    • Material: Closed-cell NBR rubber foam
    • Color: Black
    • Adhesive: Pressure-sensitive adhesive backing
    • Liner: Silicone paper or film release liner
    • Thickness: 3mm, 6mm, 9mm, 12mm, or custom
    • Width: 25mm, 38mm, 50mm, 75mm, 100mm, or slit width
    Read moreDone