No products were found matching your selection.
Other Related Products
-
- Common size: 25 mm-100 mm width, custom slit rolls available
- Color: Black, grey, or white closed cell foam
- Material: PE/XPE closed cell foam with pressure-sensitive adhesive
- Thickness: 3 mm-12 mm, selected by joint gap and fastener pressure
- Use position: Between roof panels, wall cladding, frames, purlins, and girts
- Main function: Thermal bridge reduction and condensation control
-
- Width: 12 mm, 15 mm, 20 mm, 25 mm
- Thickness: 2 mm, 3 mm, 4 mm
- Length: 5 m, 10 m, 15 ft, custom
- Color: Black or dark gray
- Material: High-temperature fiber/felt
- Backing: Self-adhesive with release liner
-
- Material: Made of Acrylic adhesive and PVC foam.
- Release Liner: Blue film.
- Available Width: 9 mm, 10 mm, 12 mm.
- Tape Length: 20 m per roll.
- Thickness: 1 mm to 10 mm.
-
-
Adhesive Types: Solvent acrylic, water-based acrylic, hot-melt rubber, solvent rubber.
-
Carrier Options: Tissue, PET film, non-woven fabric.
-
Liner Choices: Glassine paper, PE kraft, PET film, custom logo liner.
- Multiple sizes: Width is 6 mm, 9 mm, 12 mm, 15 mm, 18 mm.
-
Thickness: 0.08 mm – 0.14 mm.
- Tape Length: 10 meters, 30 meters for each roll.
-
- Common thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
- Color options: Clear tape, red film liner, yellow paper liner, clear film liner
- Carrier material: Stable PET film carrier
- Adhesive structure: Double coated acrylic pressure-sensitive adhesive
- Supply form: Jumbo roll, slit roll, long roll, sheet, die-cut part
- Applications: Electronics, panels, nameplates, displays, automotive trim
-
- Color: Clear transparent appearance
- Core: Clear acrylic foam core
- Adhesive: Acrylic pressure-sensitive adhesive
- Thickness: 0.25 mm to 2.0 mm typical range
- Liner: PE or PET release film
- Format: Rolls, slit rolls, strips, kiss-cut parts, die-cut pads
-
- Common thickness: 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm
- Common width: 10 mm, 12 mm, 15 mm, 20 mm, 25 mm, 50 mm
- Color options: Clear, white, black
- Carrier: High-density foam or acrylic foam
- Adhesive: Pressure-sensitive acrylic adhesive
- Main use: No-drill indoor mounting on smooth rigid surfaces
-
- Types of Foam Gasket Materials: Silicone foam, Polyurethane foam, Polyethylene foam, Urethane foam, Neoprene foam.
- Adhesive: High-performance acrylic or a high temperature silicone adhesive.
- Available Width: 15 mm, 19 mm, 25 mm and so on.
- Standard Length: 10 m, 15 meter one roll.
- Tape Thickness: 6 mm.
-
- Common thickness:5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Color:Deep black for clean visible edges
- Carrier:Closed-cell black PE foam
- Adhesive:Double sided acrylic or rubber adhesive option
- Liner:Paper or film liner for slitting and die-cutting
- Uses:Signs, badges, trim parts, display frames
